造型机维护技巧 Molding machine maintenance skills 当造型机在经过安装调试并投入生产的同时，必须严格按照其必要的保养维护程序来进行保养。下文我们来从7部细说一下造型机的维护技巧。 When the molding machine is installed and tested and put into production, it must be maintained in strict accordance with the necessary maintenance procedure. Below we will discuss the maintenance skills of the molding machine from 7 details. 技巧一、造型机射芯机所有注油点必须定期按其部位要求加注机油、润滑油或油脂。 Skill 1. All the injection points of the molding machine can be filled with oil, lubricating oil or grease on a regular basis. 技巧二、对密封件（易损件）必须每天检查，如被损坏立即更换。 2. The sealing parts (vulnerable parts) must be inspected daily, such as damaged and replaced immediately. 技巧三、对室体护板每天进行检查，有损坏应立即更换。 Tip 3. Check the body armor every day. Any damage should be replaced immediately. 技巧四、对造型机护板、叶片、叶轮、定向套、分丸轮每班进行二次检查，如有损坏立即更换。 Skill 4. The second inspection of molding machine armor plate, blade, impeller, orientation sleeve and pill wheel is carried out every shift, if any damage is changed immediately. 技巧五、电器系统应进行二次检查。 Skill 5. Electrical system should be checked twice. 技巧六、所有传动件每周进行二次检查。 Tip 6. All transmission parts are checked twice a week. 技巧七、操作工对造型效果应随时检查，如有异样应立即停机，并对设备进行整体检查。 7. The operator should check the molding effect at any time. If there are any abnormalities, please stop immediately, and check the equipment as a whole. 真正做到、并且做好以上7点小技巧，您的造型机射芯机设备一定会运行的更加顺利，使用寿命更长，从而为您创造更多的效益。 With the above 7 tips, your machine will be able to operate more smoothly and use longer life, thus creating more benefits for you.